Strainer & Air Eliminators
Smartflow also offers Bulk Plant Air Eliminators for variety of installations and conditions and designed for separation, elimination of air from main product.
Positive displacement meter of turbine meter, is a volumetric measuring device, cannot differentiate between liquid, air and vapour. So when liquid enters with air or vapour into this measuring devices, it will contribute the measurable error. Large amount of free air or vapour entrapped in the piping system, not only compromising meter accuracy but also lead to over speeding of meter and creating excessive wear or unit failure to ensure accurate liquid.
Measurement is necessary to remove all air from the system before entering into the measuring devices. Hence bulk plant air eliminator is installed before the meter for accuracy of the measurement devices.
770 Air Eliminator & Strainer
| A float and valve design senses and removes free air before it can enter the flow meter. Required for custody transfer applications to ensure the most precise measurement. |  |
740 Air Eliminator & Strainer
| An inline strainer and dual air eliminator for bulk storage facilities. A float and valve design senses and removes free air before it can enter the flow meter. Required for custody transfer applications to ensure the most precise measurement. Electronic air elimination also available. | |
745 High Volume Air Eliminator & Strainer
| An offset 90° strainer and air eliminator assembly designed for use in applications where a high volume of free air may potentially enter the measurement system. Recommended for mobile fuel delivery systems to pass product depletion (split compartment) |  |